DDR5/4

芯动DDR5/4 Combo IP可提供支持JEDEC标准、兼容SDRAM设备的一站式交钥匙解决方案,低功耗、高速率、小尺寸、时序优化。支持市场上所有的 JEDEC DDR5/4 SDRAM 组件。PHY组件包含DDR专用功能和实用高性能I/O、关键时序同步模块 (TSM) 和低功耗/抖动DLL,可对任何SDRAM接口进行可编程细粒度控制。且PHY 都预先组装了.lib、LEF和GDS,DDRn总线宽度可以从4位到80位或更多,易于集成,缩短客户设计周期。

The INNOSILICON DDR IPTM Mixed-Signal  DDR5/4 Combo PHY s provide turnkey physical interface solutions for ICs requiring  access to JEDEC compatible SDRAM devices. It is optimized for low power and  high speed applications with robust timing and small silicon area. It supports  all JEDEC DDR5/4 SDRAM components in the market. The PHY components contain DDR  specialized functional and utility high performance I/Os, critical timing  synchronization module (TSM) and a low power/jitter DLLs with programmable  fine-grain control for any SDRAM interface.

Note that all INNOSILICON PHY is pre-assembled with.lib, LEF and GDS so  that it is very easy to integrate the PHY with any existing SoC floor plan.  DDRn bus width can be from 4 bit to 80 bit or more. INNOSILICON is happy to  pre-assemble each PHY for our customer so that integration becomes extremely  easy.

KEY FEATURES:

  • Max data rate: 6400Mbps (DDR5) and 3200Mbps (DDR4)

  • x16/x32/x64/x72/x80 data path interface extendable

  • 1.1V/1.2V JEDEC IO standard, supporting 1.1V POD_11 and 1.2V POD_12  I/Os

  • Support DDR5 dual channel mode, dual 32bit data +8bit ECC

  • Support CA training, CS training, and write leveling training modes

  • Compatible with JESD79-5 and JESD79-4 spec

  • Support DDR5 UDIMM, RDIMM

  • Support DDR4 UDIMM, RDIMM, LRDIMM

  • Support x4, x8, x16 device type

  • Support DDR4 BL8/BL10 DDR5 BL16/BL18

  • Support DDR5 dual channel mode

  • Support DDR5 device and RCD CS and CA training

  • Support DDR5 device and RCD VREFCA/VREFCS training

  • Support DDR5 DFE and duty cycle training

  • Support gate training, write leveling, read 2D training, write 2D  training

  • Support DDR5 2N mode and DDR4 gear down mode

  • Support DIMM DWL, MREP, MRD, MWD training

  • Support DRAM/RCD Initialization

  • Read/write timing adjustments with auto calibration, dynamic V&T  tracking

  • Support delay-line BIST, at speed loop back, scan chain and boundary  scan

  • 2D Read/write training for per-bit DQ

  • Full harden PHY include PLL, P/G, ESD, decap, Bump

  • PHY embedded RSICV CPU for easy firmware integration

  • Fully pre-assemble design, Drop-in hard macro to ease integration  and speed time to market,

  • Zero risk with robust ESD architecture

  • Maintains self-refresh I/O drive state during VDD power down

  • Extensive EDA tool support for various design automation flows

  • DFI5.0/4.0 compliant memory controller interface

  • Takes full advantage of process power savings and speed capability

  • Best in class low noise design to ensure best timing margin and  signal integrity

  • DFT functions to reduce test time and ensure high test coverage

  • Several programmable PHY operating modes through simple register  interface

  • Per Bit De-skew to improve composite data eye during read cycles at  high speed

INNOSILICON ADVANTAGES:

  • Fully customized solutions including Controller and PHY

  • Over 500,000 wafers shipped out with Innosilicon DDRn IP

  • All major processes fully covered, such as  55nm to 28nm, 22nm, 14nm, 12nm, 8nm, 7nm,  6nm, 5nm.

  • Full harden PHY proven by 100+ tapeouts

  • Simple integration with pre-assembled PHY

  • Low IO pin count

  • High performance

  • Test chip and FPGA integration services available

EXAMPLE APPLICATIONS:

一键启动,简化您的下一个产品设计流程!


联系
我们

定制
需求