USB 3.0 PHY(Host/Device/OTG/Hub)

The INNOSILICON USB 3.0 PHY is fully spec compliant and it can be combined with PCIe2.0 and SATA3.0. Combining the efficiency of a mature, but compact, USB 2.0 PHY with a Super Speed PHY to provide 5Gb/s operation, this complete solution is the answer to your USB 3.0 needs.

Streamlined production testing is supported through BIST, multiple loopback modes and boundary scan.

Its modular nature is flexible, ensuring a PHY combination that is able to support the latest in C-type connector configurations while including all the I/Os, ESD in a single drop-in block. As with all Innosilicon IP, our USB 3.0 solution is fully customizable to meet your specific needs.

KEY FEATURES:

Supports 5.0Gb/s serial data transmission rate
Utilizes 8-bit, 16-bit or 32- bit parallel interface to transmit and receive USB SuperSpeed data
Allows integration of high speed components into a single functional block as seen by the device designer.
Data and clock recovery from serial stream on the USB SuperSpeed bus
Holding registers to stage transmit and receive data
Supports direct disparity control for use in transmitting compliance pattern
8b/10b encode/decode and error indication
Receiver detection
Low Frequency Periodic Signaling ( LFPS) Transmission
Selectable Tx Margining
one PHY support 3 protocols (sbared pMA)

INNOSILICON ADVANTAGES:

Small die size
Low pin counts
Low power consumption
Fully customizable

BLOCK DIAGRAM:

EXAMPLE APPLICATIONS:

一键启动，简化您的下一个产品设计流程！

输入您的IP需求